Basic Info.
After-sales Service
Field Installation, Commissioning and Training
Operation Pressure
Atmospheric Pressure
Inlet Temperature
High Temperature
Transport Package
Standard Packing Per Product Technical Specificat
Specification
diameter: 3450*10200mm
Product Description
THE TRIPLE LAYER SINGLE CHANNEL DRYER
With the increasing tension of environmental resource, the comprehensive utilization of the biomass energy has been increasingly valued by us, Biomass pellet fuel manufacturing equipment has been further developed. In terms of bioenergy utilization, due to the high-water content of the wood chips, sawdust, straw, etc., Direct combustion has low heat efficiency, incomplete combustion, and produces a large amount of smoke, which increases the cost of environmental protection and dust removal. The international general biomass utilization method is that the biomass raw materials are through crushed, dried, and dehydrated, dashed, and high-pressure forming,when the water content reaches 12-15%, calorific value is 4200-4800kcal/kg, and the ash content is ≤1%. It is made into energy-gathering pellet fuel for efficient use. According to market demand, our company has developed a triple layer single channel dryer for raw materials in a targeted manner. It is suitable for wood chips, sawdust, bamboo chips, wooden shavings, shavings, barley stalks, oat stalks, wheat stalks, rye stalks, rice straws, sorghum stalks, corn stalks, potato vines, bean stalks, peanut vines. According to the characteristics of each biomass material, Production capacity, application requirements, cost control, degree of automation, on-site working conditions to carry out optimized drying process technology. Our machine has a large output, high efficiency, and energy saving, and cover a small area, it can save energy by 30-50% compared with ordinary dryers, which can maximize energy saving and drying costs. Product Parameters
| Spec | Capacity(kg/hour) | Water removal(kg/hour) | Diameter * Length(mm) | Heat Required(kcal/hour) |
| SG-20 | 2000 | 1400 | 2300X6040 | 140X10^4 |
| SG-40 | 4000 | 2800 | 2700X9660 | 280X10^4 |
| SG-60 | 6000 | 4200 | 3450X10200 | 420X10^4 |
Working principle
The moisture rangs from 50% to 15%
The material process is the crushed material with about 35-50% moisture is sent to the drum by the conveyor to realize the downstream drying, the materials are continuously picked up and scattered under the inner layer of the copy board, and move forward in a spiral manner, through the three layers of inner, middle, and outer to realize the heat exchange of materials and hot air,The material that achieves the drying effect travels quickly and discharged out of the drum under the action of the wind, wet materials that have not reached the drying effect cannot move quickly due to their own weight,the material is dried in the control stroke, so that can be achieve the drying effect,our dryer can decrease the raw material moisture content to 12-15%,when the drying process is completed and discharged by the screw conveyor. A shock cleaning device is installed inside the drum to prevent the material from adhering to the wall of the drum.
The gas process is that air through the pressurized by the blower of the hot blast stove and enters the hot blast stove for combustion and heating, when the temperature reaches 500-550ºC, it will be sucked into the dryer by the induced draft fan after the dryer to dry the material and evaporate the water, when the temperature drops to 55-60ºC and discharged from the dryer, the dust-containing moisture is collected by the cyclone dust collector, and the wet dust collector is purified and discharged up to the standard.
The features
- This sawdust dryer has achieved intelligent control---the operating parameters can be controlled automatically with one-button operation.
- The sawdust dryer can automatically remove impurities and iron to ensure that the impurities of the wood chips to be baked will not enter the subsequent process
- The thermal efficiency of three-layer dryer is 30% higher than traditional single layer dryer.
- With four-wheel drive, more stable and reliable transmission.
- It covers about 50% less land than the single-drum dryer, which reduces the civil construction investment by about 50%.
- The internal structure of the dryer adopts a variety of high-efficiency lifting plate combination modes, which can effectively control the drying process and heat distribution, with high heat utilization, and the exhaust gas exhaust temperature below 50°C.
- Variable speed is available to control the material feeding volume, and the desired final moisture index can be easily adjusted and controlled according to the customer's requirement.
- Modular dust collection, dust removal, purification and heat recycle, are safe and environmentally friendly.
- It is equipped with a variety of new energy-saving hot air stoves, which are highly energy-efficient, controllable heating, and simple to operate,energy consumption can be reduced by about 30%, power consumption can be reduced by 20%, and operating costs are lowe
Customer Case
Company Profile
ABOUT USJiangsu Kingwood Industrial Co., Ltd. (listed in National Equities Exchange and Quotations, stock code: 871765), located in Zhongguancun Industrial Park of Liyang City, Jiangsu Province, China. The company covers an area of more than 35,000, with 30 million USD existing fixed assets. It is a high-tech enterprise which is dedicated to develop low-carbon, and renewable energy equipment and advanced feed mill industry.Established in 1999, Kingwood has been dedicated in providing one stop solution in biomass engineering, animal feed engineering and spare parts business for our valued customers, and these services are including: consultation, design, manufacture, logistic, installation, commissioning, training, and after-sales service for biomass/feed production line.Core value: Use "customer and supplier win-win" as the management principle, and "long-term development" as the business purpose, work with domestic and foreign customers to promote each other and create a win-win situation.Our mission:A "blue" innovative company researching future energy/feed technology, creating a "green" responsible company with low-carbon recycling and environmental protection. Spirit:Pioneering spirit of "Exploring and Enterprising"Inovative spirit of "Daring to be the first mover"Striving spirit of "Honest and Hard-working"Established in 1999, we have rich production experience and sales experience.
| We strictly control each production point and strictly implement all quality control in the key production
| Kingwood has a variety of processing equipment, but also equipped with a variety of advanced testing equipment.
| We have a complete 1S09000 and 1S014000, and has passed the CE certification.
|
Address:
Building 4, 568 Hongsheng Road, Kunlun Street, Liyang, Changzhou, Jiangsu, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Industrial Equipment & Components, Manufacturing & Processing Machinery
Management System Certification:
ISO 9001
Company Introduction:
Jiangsu Kingwood Industrial Co., Ltd. (listed in National Equities Exchange and Quotations, stock code: 871765), located in Zhongguancun Industrial Park of Liyang City, Jiangsu Province, China. The company covers an area of more than 35, 000m2, with 30 million USD existing fixed assets. It is a high-tech enterprise which is dedicated to develop low-carbon, and renewable energy equipment and advanced feed mill industry. Established in 1999, Kingwood has been dedicated in providing one stop solution in biomass engineering, animal feed engineering and spare parts business for our valued customers, and these services are including: Consultation, design, manufacture, logistic, installation, commissioning, training, and after-sales service for biomass/feed production line.
){kind=link}