Basic Info.
After-sales Service
Field Installation, Commissioning and Training
Pellet Pulverization Rate
<10%
The Power of The Main Motor
200kw Servo Motors
Product Description
High Efficiency Wood Pellet Mill
wood pellet machine is widely used in wood and other fiber crops of the material molding granulation, the main raw material is used for forestry agricultural waste such as logs, branches, sawdust, rice husk, corn stalks, peanut shells, bagasse, cotton, dried mustard, bamboo, straw, palm shell, coconut, palm silk, etc.Introduction of TYL series liquid-cooled high efficiency permanent magnet synchronous servo motors TYL series liquid-cooled high-efficiency permanent magnet synchronous servo motor is equipped with power drive according to the operating condition of Biomass wood pellet machine,the motor is cooled by circulating cooling water or oil, and the electro-mechanical efficiency reaches GB30253-2013 energy efficiency limit value of permanent magnet synchronous motor and energy efficiency level 2.I. The comparison of traditional three-phase asynchronous motor from the aspect of energy savingTYL series liquid-cooled high-efficiency permanent magnet synchronous servo motor is more power-saving than traditional three-phase asynchronous motor. The stator of the motor adopts high-permeability low-loss silicon steel sheet and special high-frequency windings, the rotor is made of high-performance NdFeb magnetic steel, the motor has no excitation current, the motor has the characteristics of small size, low inertia, high rigidity, low noise, fast response, stable operation, precise control, strong overload capacity, high power factor and high efficiency. Under continuous constant load operation, the power saving effect is considerable, the power saving effect of continuous periodic load is particularly significant.
II. Compare the traditional three-phase asynchronous motor from the heat dissipation and reliability
TYL series liquid-cooled high-efficiency permanent magnet synchronous servo motor is cooled by circulating cooling water or oil, which has better heat dissipation effect than traditional air-cooled three-phase asynchronous motor. The motor base is made of carbon steel plate formed at high temperature and cooled naturally, with small deformation coefficient, high strength, strong corrosion resistance and high thermal conductivity. It can withstand the pressure of 1Mpa coolant. The coolant flow channel configuration is designed in axial direction with large contact area, large diameter and small resistance. Good cooling can be obtained when operating under overload, continuous constant load and periodic load.III. Compared the traditional three - phase asynchronous motor from the protection levelThe protection level of traditional air-cooled three-phase asynchronous motor is IP54, and the protection level of TYL series liquid-cooled high-efficiency permanent magnet synchronous servo motor can reach IP55 at least, and the protection level is higher. For bio-wood granule industry, our company has further improved the protection level of TYL series liquid-cooled high-efficiency permanent magnet synchronous servo motor on the basis of IP54 three-phase asynchronous motor.IV. Compare the traditional three-phase asynchronous motor from the aspect of installationFor the bio-wood pellet industry, Our company designs the installation mode and size of TYL series liquid-cooled high-efficiency permanent magnet synchronous servo motor to be the same as that of three-phase asynchronous motor with the same power and speed, which can realize seamless replacement of the motor and facilitate installation and use of the motor. Product Parameters
| Capacity | 3-3.5 t/h |
| The power of the main motor | 200kw servo motors |
| Power of feed screw motor | 3kw |
| Power of the forced feed motor | 2.2kw |
| pellet forming rate | ≥90% |
| pellet pulverization rate | ≤10% |
| Noise | ≤93dB(A) |
| SIZE(L*W*H) | 3530*1580*2390mm |
| Weight:about | 9.5T |
Product Description
Working principle
The powdery sawdust, straw, bark, and other materials in the pelleting silo are sent into the chute through the feeding screw, the material enters the compression chamber through the forced feeder, and feed the material into the two pressing areas in the ring die through the feeding scraper, because the high-speed rotation of the ring die brings the material into between the ring die and the roller, the material is gradually compacted under the strong squeezing action of the ring die and the roller, and formed in the die hole, because the extrusion of the material between the ring die and roller is continuous, so that the formed material is continuously discharged from the die hole in a columnar shape, and then cut into particles of the required length by the cutter, and enters the next process.Application1) Feed for livestock in large farms, easy to store and transport; 2) Civil heating and energy consumption, clean, pollution-free, easy to store and transport;
3) Industrial boiler and kiln fuel, instead of coal and gas, to solve environmental pollution;
4) It can be used as fuel for gasification power generation and thermal power generation to solve the shutdown problem of small thermal power plants.Machine Details1. Feeder 2. Cover 3. Base 4. Coupling cover 5. Switch 6. Mian motor 7. Support frame 8. Cutter 9. Hoist 10. Feeding screw 11. Feeding reduce screw 12. Hygroscopic duct
Detailed Photos
Customer Case
Company Profile
ABOUT US
Jiangsu Kingwood Industrial Co., Ltd. (listed in National Equities Exchange and Quotations, stock code: 871765), located in Zhongguancun Industrial Park of Liyang City, Jiangsu Province, China. The company covers an area of more than 35,000, with 30 million USD existing fixed assets. It is a high-tech enterprise which is dedicated to develop low-carbon, and renewable energy equipment and advanced feed mill industry.
Established in 1999, Kingwood has been dedicated in providing one stop solution in biomass engineering, animal feed engineering and spare parts business for our valued customers, and these services are including: consultation, design, manufacture, logistic, installation, commissioning, training, and after-sales service for biomass/feed production line.
Q1: Are you a factory or trading company?
A1: We are special trading company owned by our factory. And our factory located in Changzhou, China, with nearly 100 workers in total. We have over 20 years' experience in industries
Q2: How you guarantee your product quality?
A2: Kingwood is always pay attention to the production quality and quality improvement, in order to achieve the high quality to meet high demand, we build the most advanced manufacturing equipment and strictly control every production point, not only from the procurement of the raw material, spare parts processing, welding, but also the assembly to finished product delivery. All quality controls in key production process is implemented strictly in Kingwood
Q3: How about the delivery date?
A3: We build no storage management system, so before you place orders, please contact our sales team, they will give you professional delivery solution according to the product / production line lead time
Q4: How about the technical support from Kingwood?
A4: Kingwood has built the full service system from pre-sales, installation & commissioning and aftersales service including preventive maintenance, corrective maintenance and training process. According to customer's requirement, we can provide service both online and in customer's jobsite. And we also have oversea engineers in some countries in South East Asia / CIS/ East Europe and Latin America area that are available to service you at any time.
Q5: How about the guarantee period?
A5: One year after our product arrives customer's jobsite but no longer than 18month from BL date.
Address:
Building 4, 568 Hongsheng Road, Kunlun Street, Liyang, Changzhou, Jiangsu, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Industrial Equipment & Components, Manufacturing & Processing Machinery
Management System Certification:
ISO 9001
Company Introduction:
Jiangsu Kingwood Industrial Co., Ltd. (listed in National Equities Exchange and Quotations, stock code: 871765), located in Zhongguancun Industrial Park of Liyang City, Jiangsu Province, China. The company covers an area of more than 35, 000m2, with 30 million USD existing fixed assets. It is a high-tech enterprise which is dedicated to develop low-carbon, and renewable energy equipment and advanced feed mill industry. Established in 1999, Kingwood has been dedicated in providing one stop solution in biomass engineering, animal feed engineering and spare parts business for our valued customers, and these services are including: Consultation, design, manufacture, logistic, installation, commissioning, training, and after-sales service for biomass/feed production line.
